Sanduuqa Isku-xirka Qorraxda ee Waxqabadka Sare ee Waxtarka ugu Sarreysa

Sharaxaad Gaaban:

√ Brand DONGKE
√ Asal ahaan badeecada HANGZHOU, Shiinaha
√ Waqtiga keenista 7-15 MAALMOOD
√ Awoodda sahayda 90T/Bishii
Shayga (dharka dahaarka leh ee ribbon naxaasta ah) wuxuu ku salaysan yahay cabbirka ballac * Dhumucdiisuna: 1.5 * 0.2 mm (sidoo kale waxay noqon kartaa 1.5-2.5mm * 0.08-0.25mm sida ikhtiyaarkaaga),
Iibinta sida badan, 2kgs/badan.
Haddii aad rabto inaad iibsato tiro ka badan ama ka yar, pls nala soo xidhiidh, waxaanu kuu saxi doonaa qiimaha iyo qiimaha xamuulka.

Email noogu soo dir

Faahfaahinta Alaabta

Tags Product

Sharaxaada

Astaamaha iyo Codsiyada:
Shayga (dharka dahaarka leh ee ribbon naxaasta ah) wuxuu ku salaysan yahay cabbirka ballac * Dhumucdiisuna: 1.5 * 0.2 mm (sidoo kale waxay noqon kartaa 1.5-2.5mm * 0.08-0.25mm sida ikhtiyaarkaaga),
Iibinta sida badan, 2kgs/badan.
Haddii aad rabto inaad iibsato tiro ka badan ama ka yar, pls nala soo xidhiidh, waxaanu kuu saxi doonaa qiimaha iyo qiimaha xamuulka.

Ku saabsan Ribbon baska PV

ribbon PV wuxuu ka kooban yahay Copper iyo Alloys dahaar ah, waxaana loo qaybiyaa Tabbing Ribbon iyo ribbon baska.
Tabbing Ribbon: waxa ay caadi ahaan isku xidhaa dhinacyada togan iyo kuwa taban ee unugyada si taxane ah.
Ribbon baska: wuxuu xooga saarayaa xadhkaha unugga ee isku xidha sanduuqa iyo kanaalada hadda korantada.

tilmaamo

1) ribbon alxanka ah ee tamarta weyn ee qoraxda:

Saldhigga naxaasta	koronto yaqaan Park copper (TR line) rogaaya ama T2 cajalad naxaas ah
Iska caabin substrate Copper	ρ ≤ 0.0172Ωmm2 / m
Halabuurka Alxan	62% Sn36% Pb2% Ag;60% Sn40% Pb;96.5% Sn3.5% Ag (Bi ikhtiyaari ah)
Dhumucda lakabka daasadda	10μm-40μm, lebis dhinac ah
leexashada dhumucda	≤ 0.008
leexashada ballaca	alaabta duuban ≤ 0.1mm;kala goynta Badeecooyinka ≤ 0.005mm
Dheeraynta	gobolka jilicsan ≥ 20%;gobolka jilicsan ≥ 15%
Tilmaamaha	ballac 1.5mm-2.5mm;dhumucdiisuna waa 0.08mm-0.25mm.(halkan waa 1.5*0.2mm)
Baakadaha	kartoon, "I qaabeeyaa" wheel, sanduuq
Ku habboon DIY unugyada cadceedda iyo muraayadda qorraxda, oo sidoo kale ku habboon mashiinka alxanka tooska ah ee dhexe iyada oo aan la gooyn;dalag loogu talagalay macaamiisha L

2) ribbon alxanka ee epoxy solar panel iwm. mini qoraxda:

Xaaladaha Kaydinta iyo Nolosha shelf

Dheebka naxaasta ah ee qasacadaysan waa in lagu kaydiyaa qol qalalan oo hawo leh, halkaas oo aan lahayn aashito, alkail, ama gaas waxyeello leh iyo huurka qaraabada gudaha waa in aanu dhaafin 60%.Si toosan u dhig markaad isku dhejinayso kana fogow soo saarista kartoonka & meelaynta toosan, dhanka kale, tirada isku raranta ee alaabada kama badna shan lakab ama 1 tan.Nolosha shelf waxay noqon kartaa ilaa lix bilood laga soo bilaabo taariikhda wax soo saarka.